For carpet and upholstery cleaning, we use the Freedom XT truck-mounted extractor. This machine allows us to use up to 4000 PSI to clean your carpets quickly and thoroughly. Specialized wands and attachments used with the Freedom provide our technicians with assorted tools and methods for cleaning various sized and shaped areas of textile.

All Stains Can Be Removed!

The Rotovac Carpet Restoration Power Wand delivers 1500 multi-directional cleaning passes per minute and uses a patented “Steam Chamber” to ensure that any stain can be removed safely from even the most delicate types of carpet. Three spinning jets inside the steam chamber spray hot water and the accompanying steam into the area of carpet enclosed within the steam chamber, forcing stains to release from the fibers of the carpet or upholstery. Three vacuum slits in the chamber quickly remove all water and stains.

The Rejuvenators offer a variety of chemical treatments for stain removal, high traffic areas, odors and can even improve the texture of your textile furnishings and floor coverings. Using our tried and true method of cleaning, even the toughest stains, including protein based stains from blood or pets can be removed.

The Finest Equipment and Methods for Cleaning Your Tile

The Rejuvenators have tested and researched all available resources to bring you the finest equipment, technology and methods for cleaning your tile. While there are many different types of tile that are commonly used as flooring in homes and businesses, the most common types are Ceramic, Porcelain and Italian Quarry tile. These are also the types of tile that are most durable and easiest to clean. We utilize a three step process that has been refined over the years to offer you the safest and most effective method of cleaning these types of tile.

STEP ONE: Break the Bonds

A chemical solution or blend of chemicals may be applied to the soiled tile floor in order to loosen dirt and break the chemical bonds between the tile and foreign particles. After allowing the chemical solution to set for a few minutes, the tile floor is then buffed using an industrial buffing machine. This machine uses a rotating flat brush to further loosen any ground in dirt or stains. The bristles are safe and effective for use on any type of hard floor surface.

STEP TWO: Remove Dirt and Stains

The next step is to use a Turbo Force machine to rinse and dry the floor. The Turbo Force cleaning tool has three spinning jets that spray water and chemical solutions at very high pressures to remove stains. Because the jets rotate within the chamber,the pores of the tile are bombarded with steaming water from all directions. The water and chemical solution is instantly extracted from the floor using a powerful truck mounted extractor, leaving stains no time to resettle into the pores of the tile. This two step process is guaranteed to remove all stains from tile and grout.

STEP THREE : Prevent Future Stains

The grout and tile surfaces themselves may be sealed in order to prevent dirt and stains from settling in the pores of the floor. For grout sealing, the sealer is applied directly to the grout using an in-line spray machine. The sealer must then be allowed to dry for 30-60 minutes. The excess is then wiped off of the floor. The sealant will protect the grout from absorbing stains for the following 3-5 years. The tile and grout should then come cleaner after future cleanings, and spills can be wiped up easily without soaking into the grout.The sealer comes with a 2-3 year warranty (depending on the age and original condition of the tile before cleaning and sealing.) Sealer is priced at 60 cents per square foot of floor.